Parents And Children

Children in the joy and the sadness in the health and the illness until to the adolescence in he currently separates (Oliveira and Magar, 2006) the reality to them that we see in the reporters regarding parents and children are of if scaring, parents whom they kill children, and children who kill parents. Currently parents teach its children of two, three, four aninhos to dance CRU; only that when these children will be with twelve, thirteen, fourteen years, the girls appear pregnant and the boys parents before the time, are its parents who take a CRU. More than good examples the television is full, or to say goes me that BIG BROTHER is not a good example? Men and Women if displaying, wanting to be celebrity; TV programs making of the girls princess per one day, children dancing seminua and the mothers in the first line finding bonitinho, is lamentable, is to make of our children women before the hour, is lamentable, is crime. Attention! Father who does not catch son in the col, goes to find it knot col of another one. Very well-taken care of! he loves, he respects, it observes, it educates, who plant harvests, what it wants spoon? Now he is each one in its square, we cannot change this, the house is its, the son is its, tapinha does not ache in the others, but in you it aches yes. To say the son: you is very important for mim, is to make the children to participate of what they really mean for you. It thinks about this!

Printing Production Features Offset Printing

Printing is a branch of production, bringing together the different ways the printed reproduction of text production, illustration, etc., in the form of newspapers, magazines, books, booklets, posters, labels, maps, forms and many other varieties of printed products. Printing Technology helps with the technical facilities to receive a specified number of identical copies of graphic images – letters, signs, drawings. The basis of the principle of printing reproduction, or transmission, in other words, the printing of the material, which is called the plate on a surface – printed material. There different ways to transfer images from the printing plate to the substrate. First – this is high (or typographic) method in which the printing elements are located above the non. When applied to printed form, it only covers the printing form, and thus only these elements will print on the printed material. The second way – intaglio printing, which is a mirror image of letterpress printing, which the printing area in the recess, and elevated white space. The third way – a flat printing, where print and non-printing areas are in the same plane.

In technology, conceived the idea of a flat print print first on a cylinder with an elastic (rubber) coating, and only after the image is transferred from the cylinder to the paper. Thus, the portable has been enhanced or offset printing, which reached a high time level. At present it is considered a universal technique of printing, offset printing is gradually displacing even from areas that are once her main area printing processes – processes of transfer of ink from printed form (sometimes using an intermediate medium such as a blanket cylinder) to the substrate, as well as related preparatory operations Printing – this is repeated to obtain the same images with the specified quality parameters by transferring ink from the printing plate (either directly or through an intermediate surface) na substrates.

Professional Librarians

Lydian Ana Rudakoff Nephew In the history of Brazil the reading never was so important. All the moment the government promotes campaigns and programs as the National Program of the Library of the School (PNBE) and National Plan of Livro Didtico (PNLD) to improve the reading in qualitative and quantitative terms. These programs and campaigns are destined in its majority to the infantile public and youthful whom in turn it needs a mediator, u is, a person who approaches this public of books, fits to the professional of the librarian this function. This leads to a very serious question: when the librarian does not like reads? How this professional will be able to stimulate the reading to its users? According to Immanuel philosopher Kant ‘ ‘ a man alone can be educated by fellow creature, that is, for another man educado’ ‘. This phrase if applies very well in the formation of readers.

If the librarian does not bring the taste to read, as he can this professional transmit to the reading futures the pleasure on books stops to extract of them knowledge? The librarian must have some personal qualities, beyond the abilities techniques acquired throughout the course of bachelor in biblioteconomia, the professional must possess the habit to read, to be able to indicate books to the reading futures, to know the quantity where he works and that he has of new that if can acquire, knowing the user and the community where the library is inserted. If the librarian does not read, who will go to develop these functions? For the reading lack the librarian finishes being them functions outside. The example can be cited the process of communication between professional and the user, as well as the study of the community, to know if the library corresponds the informacionais necessities of the same ones.

Technology For The Development Of Soil

Construction Excavators – self-propelled earth-moving machines, designed to develop and move the soil in the dump or vehicles. Scope of application: device channels, ditches, trenches, road cuts, construction of embankments and dams, work in quarries. A distinctive feature of excavators digging in a group and excavation machines is their expertise in the development and movement of soil only in the work zone. The operations on the Transport of soil in the earthworks (embankments, dams, etc.) carry out specially for this kit in transport vehicles. Due to the fact that the development of the soil and transporting it made in parallel by different machines, excavators productivity is higher than the earth-moving machinery of comparable power.

The effectiveness of this technical solution requires evaluation, as it increases the set of machines, but it is high performance and reliability have made the most common excavators and machinery leading to the earthworks. Historically, the development of construction excavator always been directed at maximum compliance of its consumer properties of technical and technological characteristics of the earthworks. The excavator was one of the first earth-moving machines. Back in 1500 Leonardo da Vinci's drawings of machines developed for the digging of canals, which became the prototype excavator with grab grip and crane. Russia's first bucket excavator was built on the Izhora plant in 1811, its capacity was only 11 kW (15 hp). In 1902 Putilov was built for 32 steam excavator with bucket 2.29 m, and in 1905 the German company has released a steerable steam shovel, bucket of 4 m.

In the future, excavators began to use electric and diesel engines. Increased their power. In 1947 in Russia were built at Uralmash excavators with bucket 3 … 5 m, and in 1975 in the same factory made walking dragline excavator with bucket capacity of 100 m. In 1987, excavators Park building complex our country totaled 171.3 thousand cars. The running equipment is tracked excavators, walking, pneumatic wheel, motor and buoyant. Track and especially walking equipment used for high-power excavators, working mainly on large, concentrated objects with large amounts of excavation. Especially effective is the availability of a replacement of working equipment, which allows for flexible excavation technology. For example, the presence of removable bucket at working equipment backhoe: normal, narrow, and shaped trench allows us to develop various project profile with minimal intervals for the conversion. These features ultimately reflected in the annual replacement and performance vehicles, expanding the scope of their management. Even this classification is coarsened shows the wide possibilities of excavators and justify their massive use in construction. – information about excavators

Technology Application

We recommend that you use to plaster the walls 'stucco'. To understand the benefits of using 'plaster', it should consider the following features: applied to the wall with a thin layer that allows you to display a wall with a minimum of material, does not shrink and does not crack, dry out in two times faster than conventional plaster putty consumption of plaster surface is greatly reduced. If take into account all these factors, the total cost of materials compared with similar work using conventional cement-sand mix will remain unchanged. However, you will significantly save on time, the cost of the work and certainly get better and more reliable result. Before applying the plaster, the wall is applied to the soil depth of penetration, which allows a layer of plaster is stronger hold on the wall. In plaster wall in a fiberglass reinforcing mesh, which allows you to smooth out the voltage inside the plaster and avoid the appearance of microcracks.

Next on the surface of the plaster is applied several coats of putty. Before each layer of the ground surface. Then the wall is polished and applied topcoat sealers (special putty with a small fraction). If the wall is being prepared for painting, polishing and then coating produced by the light special high-powered searchlights, which allows you to keep track of the smallest flaws on the wall. At the end of the pre-treatment of the wall is ready for application of finishing materials (paint, wallpaper, decorative plaster, etc.) Technology Application of different types of finishing materials are not identical. Next we take a closer look at some of them.

Paint the ceiling preparation does not differ much from the training walls. Device screed and waterproofing First, using gidrourovnya done marking of the floor level. Of the place, most raised relative to the rest room, then on the walls made a mark of zero.

Dragons Gold

Already it is no secret that the film adaptation of the book, marked the beginning of the history of Middle-earth – Tolkien "The Hobbit" will be filmed by Peter Jackson. Studio New Line Cinema offered him a job painting the executive producer. The director is well-known Mexican Guillermo del Toro ("Hellboy," "Pan's Labyrinth"). Along with Jackson, they will be engaged in the scenario of diptych, the output of the first part of which is scheduled for 2010. The total budget for the picture hearings will be 300 million dollars.

In addition, the studio has a problem in the face of the proverbial financial debt to the heirs of the writer, and specifically – 83hletnego Christopher Tolkien, who had not seen a single movie adaptation. Whatever it was, but I think these problems, despite the astronomical numbers, will still be settled. But this concern is the identity of the person in the director's chair. Guillermo Del Toro's director is good, albeit with a reputation for "child-killers." Nevertheless, his style is too gloomy for Tolkien. Without further hesitation he can be trusted to Anderson, or "Harry Potter and the Deathly Hallows." But not a sweet tale about a kid from Shire, who went to the company 13 Dwarfs Treasure Dragon (fully alive, I dare say).

And given the artistic delights Del Toro, not at all surprised if Bilbo would rastatuirovan flourishes, and Gandalf's eyes with individuals transplanted somewhere closer to his feet, than to the head. Again, spoiled with battle scenes of "The Lord of the Rings", the audience will be very hard to please. And I assure you, Del Toro is not monumental, in contrast to Jackson. I am afraid that we are of Middle-earth will not see the way it was after …

The Assortment

Osobym market promotional products are products made of PVC. We present a list of advertising and souvenir items made of PVC, we propose to produce for you: it’s PVC magnets, PVC keychains, PVC resin, optical, PVC nomerki and PVC badges, chevrons Sew, adhesive badges and dr.Takoy form of souvenirs, like PVC PVC key rings (trinkets made of soft rubber), PVC magnets, koastery begin to use all big and strong demand. Technology making trinkets PVC, allows you to create keychains, magnets, PVC koastery of different shapes, thicknesses, amazingly juicy colors. Special fluorescent additives can produce PVC keychains, PVC magnets, PVC koastery, glowing in the dark, and the use of flavors and allows production of scented charms. Souvenirs from a glass is also included in the assortment of products that we produce. Souvenirs from a glass often used as a solid business gifts. This category includes items such as clocks (wall, desk), ashtrays, lamps, pictures and paintings and other distinctive features of these gifts – their original artistic design combined with the classical tradition. Propose to apply the logo, corporate symbols in all advertising and souvenir gift products made according to your manufacture zakazu.Pri gifts and souvenirs, we use modern technology as well as technology, time-tested, such as stamping, epola, molding, etching, hot enamel, silk screening, ofset.Esli product is produced by compression sheet metal between the two forms, this technology is called stamping, and if by pouring molten metal into three-dimensional shape – molding..

Sins Of Confusion

Self-leadership: Away confusion extracted from the book 16 hours to TEMPER being author: Daniel Fernando Peiro Consultor / Motivador / copyright when I was little, on television was exhibited the series Kung Fu, where actor David Carradine played Kwai Chang Caine; but we knew the character as Kung Fu. In these pinches of humor of children, one of the friends from the neighborhood where he lived asked: why Kung Fu instead of going to the North is was to the South? None of those who were there gathered leather in hand ball and filled with mud could answer the question. The child began to laugh and intrigued everyone asked us to answer. He took a little air and launched the response with a laugh. He said: Because Kung Fu was Kungfundido. All exploit to laughter. Today, more than 35 years of that TV series of the ‘ 70s, could replace the character of Kung Fu by each of us.

You would ask: why instead of going to the North of our lives, passing his opposite cardinal point?. The answer is: because we are confused. At this time in which we live, we have instilled more apparently to direct us to be. I feel that this has led us to move away from the right path. One of the issues is not having the ability to be more precise with language.

When we wish to walk the spiritual path we intend to go to the search, however, we seek and searching tirelessly until we get tired of searching. I believe that this happens because we pay attention to the search rather than the meeting. For me, there is a big difference between being in the search and go to the meeting. We have been told also that God is in heaven and watching the inner firmament and find it inside our can’t think of us.

Freudenberger

When congregating the joined articles we select only the ones that specifically dealt with the syndrome in professionals of the area of the health and the ones that approached a general context of the same one. After that the articles had been analyzed and the information congregated in this work. QUARREL the first studies of the syndrome of Burnout had shown that professional that they have direct contact with other people (area of the health and human beings), where the care occurs of direct form, are acometidos more easily by the Syndrome of Burnout. As Maslach and Leiter (1999) the professions most vulnerable are generally the ones that involve services, treatment or education. As Souza and Silva (2002) the syndrome of the Burnout was initially described in 1974 for Freudenberger. The term can be translated as ' ' what it left to function for exhaustion of energia' ' was used for the author estresse to describe it occupational. The syndrome of Burnout is a psicopatologia that affects mainly professional whose work is characterized as aid as in the area of the health and education (MARTINEZ, 1997).

Aggravations for professionals of the health as doctors are the great intensity of emotional interactions, intense conviviality with patients the lack of free time for leisure and vacation. Moreover, it comes occurring a gradual decline of the professional autonomy, reduction of the social status of the profession and the increase of the pressures suffered for the doctors (TUCUNDUVA, et al., 2006). The professional hard work or Burnout possesss a clear-cut clinical picture characterized by emotional exhaustion, depersonalization and reduction of the professional accomplishment (TUCUNDUVA, et al., 2006). The exhaustion is characterized for the fatigue, emotional exhaustion of the individual. Depersonalization is a basic characteristic of the syndrome, that makes with that the professional treats its colleagues and patients without humanizao, as objects.

Light Drills

Makita Power Tools from the company is not in vain is one of the best in its class, which is why I would like to conduct a small survey among the novelties of the perforators of the manufacturer and compare them to previous models. For comparison, we take the easy perforatoryperforatory HR 1830, HR 2450 (network) and 162 BHR, BHR 240 RFE – powered by batteries. And the most interesting thing is that, according to the manufacturer, the battery model does not concede to their fellows, operating on the network. Thus, the first and is marked advantage of new models is that they can use in places where there is no network, and reach extension is problematic. It is also important weight and power tools: for the previous models it was 1.7 kg. model HR 1830 and 2.4 kg. model HR 2450. Cordless news BHR BHR 162 and 240 RFE weigh a little more, but this is not a weight limit for the drills, working without a net.

Secret lies in the fact that the development of these tools use the new Li-ion type battery with a voltage of 18V, which significantly reduces the weight, rather than the battery with the "voltages" to 36V. Here, of course, possible to argue and counter insufficient capacity battery of new drills to 18V, but, according to the manufacturer, special advantages in feeding 36V not present, since significantly to the power of the device is not affected. This figure only increases the weight punch that you will agree, is not quite comfortable for work. Among other useful features of new models should be noted increase to maximum speed in a model BHR 162 to 1500 r / min, compared with HR 1830 – 1100, BHR 240 RFE – is for more complex operations, there is a hammer mode. A basic, quality of the above – without the possibility of using the network, they are certainly ahead of its earlier counterparts.