With the present development of production become increasingly popular finishing materials, made of drywall and plastic. But such material as wood, time-tested, still in favor. And of course the role of cladding material itself the best option remains the wooden paneling. With groove and tongue, it is easy to assemble and versatile in use it is possible to "sheathe" any building and not just facades, but premises from the inside. The most popular wood siding – siding is made of pine – it is one of the cheapest, and it is to this day, holds first place in the category of price and quality. But if you want that would-room with his hands, in this case, the maximum lime suit lining, because it endure high temperatures and very poorly heated, and compared with the pine tar does not allocate.
Linings are made from different woods such as alder, oak, mahogany … .. but because of the very high prices they are used much less frequently than pine or lime lining. This lining material is divided into four classes – Extra, followed by classes – A, B, C. Lining-class produced the most expensive and vysokochestvennyh parody of wood, as it is free of knots and, accordingly, it is very expensive. The lower class bunks, the lower the quality and the higher the number of knots. Before you finish the installation of lining, it must be during the day for the acclimatization of the material to withstand the premises for which it is intended, and prepare all the necessary tools. You will definitely need the following tools: screwdriver, drill, wood screws, 75 and 35 mm, electrofret, screws, quick installation, wall paneling, klyamera mounting studs or 20 mm, level, hammer, plumb, mounting thread, hangers, stapler, staples, cabin, vapor barrier, mineral wool, wood block 40 * 50, and before any work you need wiring, set up to power.